null

MADE IN THE USA

Our founder, Tony Pellegrino took from his years of off-road racing his Unlimited Class Ultra4 off-road racer and used that as the performance standard for this suspension. This was a challenge since the 4 door is a long (and vulnerable) wheelbase vehicle… So we brought to market an unprecedented completely FLAT belly system that has the lower control arms tucked into the middle for protection from trail hazards (by using our unique rear mounted fuel tank). Combine that with 2.5" or 3.0" coil over shocks and you have the ultimate combination... a no compromise suspension for your JK!

This is not a "bolt-on kit"! It's designed as a system, to provide smooth, non-binding performance both on and off road.

 

AND, we have expanded the kit to be available in stages, making it MUCH more affordable, while giving you the quality and performance that comes with the GenRight Elite Suspension for your Jeep Wrangler.

 

The GenRight suspension is welded to the frame for extreme durability, and replaces ALL the weak factory brackets and mounts with new heavy duty 1/4" thick laser cut mounts!

We worked with the original factory Jeep CAD files to design this system and place the shocks in the optimal position to provide your vehicle the best articulation and dampening control for the best and most balanced ride. 

 

36 of 54 Items
  • Stage 4 JK Elite Suspension for Jeep Wrangler JKU Stage 4 is the full JK Elite build the GenRight way!

    GenRight

    Stage 4 Elite Suspension for Jeep JKU

    This is Stage 4 Elite kit for your Jeep Wrangler JKU. This is where you jump up to Currie 70 Axles, and finish your Jeep the GenRight Way. Please note you MUST have all of the Stage 1 Elite kit and Stage 2 Elite components to move to...

    $2,299.99
  • GenRight's high steer kit for the Jeep Wrangler JK & JKU with Reid Hi-Steer Knuckles GenRight's high steer kit for the Jeep Wrangler JK & JKU with Reid knuckles

    GenRight

    Stage 1 JK Elite Hi-Steer Kit - Dana 44 Front Axle

    ******OPTION***** This "one click" kit has everything you need to get our Stage 1 Elite High Steering set up on your JK Rubicon Dana 44 front axle.   We move all the steering components up and eliminate bump steer by matching the drag link and...

    $2,300.00
  • GenRight Off Road's Stage 3 JK Elite kit parts Stage 3 JK Elite under a JKU with 14 Bolt and on coilovers. Stage 3 under a JKU with Dana 60's and still on coil springs. Stage 3 JK Elite under a JKU with Dana 60's and still on coil springs. Stage 3 under a JKU with Dana 60's and still on coil springs.

    GenRight

    Stage 3 Elite Suspension for Jeep JKU

    This is Stage 3 Elite kit for your Jeep Wrangler JKU. This is where you jump up to bigger axles (new or junk yard). This step can be done on original coil type springs or with coilover shocks. Please note you MUST have all the Stage 1 Elite...

    $2,299.99
  • Complete Stage 2 Elite Suspension for Jeep JKU Complete Stage 2 Elite Suspension for Jeep JKU Complete Stage 2 Elite Suspension for Jeep JKU Complete Stage 2 Elite Suspension for Jeep JKU Optional 2.5" Internal Bypass Shocks

    GenRight

    Stage 2 Elite Suspension for Jeep JKU

    Stage 2 of the GenRight Elite Suspension System for the Jeep Wrangler JKU is the jump to 2.5" Coilover shocks and 2" hydraulic bump stops while still on your Dana 44 axles. With 37" tires a 2.5" diameter coil over shocks is the max at this stage...

    $4,999.99
  • This is the Stage 1 Elite kit, with optional Gas Tank, and Steering options. This is the complete Stage 1 Elite kit, Including the Gas Tank, and Steering options. Stage 1 Elite Suspension components for the rear 4-Link w/ GenRight Tank Stage 1 Elite Suspension components for the front 3-Link (shown with steering components) Stage 1 Elite components include all parts shown in red (from the rear)

    GenRight

    Stage 1 Elite Suspension for Jeep JKU

    This is the new more affordable Stage 1 of the famous GenRight Elite Suspension System for the Jeep Wrangler JKU. Do you already have a built JKU with a lift kit and bigger tires on it? Now you can keep the coil springs, shocks and your Dana 44 axles...

    $6,999.99
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
  • GenRight Elite Suspension Rear  upper link mount for Dynatrac ProRock 80 rear axle GenRight's rear bridge on Pro Rock 80 rear axle

    GenRight

    4 Link Rear Bridge for Dynatrac Pro Rock 80

    This is the GenRight Elite Suspension REAR Bridge (upper link mount) for a Dynatrac Pro Rock 80. The mounts were designed as part of the GenRight Elite 4 Link rear Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
  • GenRight Elite Suspension Front upper link mount for Dynatrac XD60 front axle Fits into the JK with GenRight Elite kit like a glove!

    GenRight

    3 Link Bridge for Dynatrac Pro Rock XD60

    This is the GenRight Elite Suspension FRONT Bridge (upper link mount) for a Dynatrac Pro Rock XD 60. The mounts were designed as part of the GenRight Elite 3 Link front Suspension System. Requires differential housing to be machined, drilled and...

    $799.99
    $499.99
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
  • GenRight's mounting kit for the custom Griffin Radiator JK V8 radiator Shown here mounted in the GenRight Terremoto Jeep JK Shown here mounted in the GenRight Terremoto Jeep JK with LS Shown here stuffed into the factory core support (must be modified)

    GenRight

    JK Elite Aluminum Radiator Mounts for LS Engine

    This is a custom designed mount (like the one we are running in the Terremoto Jeep JK) to hold the GenRight spec Griffin Aluminum radiator. We take out all the guess work and provide you everything you need to swap over to a super efficient aluminum...

    $429.99
  • GenRight's aluminum fuel filler bezel Installing the bezel on the side of a Jeep JK Fits the Dry Break quick fill perfectly Removable cap for filling when dry break is not available.

    GenRight

    Aluminum Fuel Fill Bezel

    This is an aluminum fuel bezel for the DBC-400 dry break (quick fill). Originally intended for use with the GenRight Race legal Fuel Cell, but it can be adapted to the side of any vehicle. This is the same thing we use on the GenRight Terremoto Jeep JK...

    $199.99
  • 1" Vent Hose Kit for Off-Road Racing Fuel Cell 1" vent hose kit at the high point 1" vent hose kit off the fuel cell (smaller blue hose)

    GenRight

    1" Vent Hose Kit for Off-Road Racing Fuel Cell

    This is a 1" diameter vent kit for the GenRight Race legal Fuel Cell. This is the same thing we use on the GenRight Terremoto Jeep JK. Designed to be low profile and take the minimal amount of space away from the cargo area. Enough tubing supplied in...

    $299.99
  • Here you can see the slight bends in the 1/4" thick wall CrMo tubing Jeep JK Frame Side Trac Bar from the GenRight Elite 3 Link Suspension kit 1/4" thick frame side mount fits the frame perfectly Shown here how it fits over the steering box frame sleeves. Double shear 9/16" Grade 8 Bolt

    GenRight

    JK Elite Frame Side Trac Bar Mount (2 or 4 Door)

     This is a Heavy Duty Frame Side Front Trac Bar Mount for the Jeep Wrangler JK, from GenRight Off Road.. It is part of our long travel GenRight Elite Coil Over Suspension System. These are the same parts included in our front 3 link kit and the...

    $124.99
  • GenRight's LS Engine and 4L80 Transmission Mounting kit for the Jeep JK Engine mounting kit for the Jeep JK includes fixture pieces to space engine mounts properly 100% designed in CAD to fit the Chevy LS engine and JK Frame with Elite Suspension This is where it mounts on the back of front cross member How the 4L80 Trans mount assembly looks

    GenRight

    JK Elite LS Engine and 4L80 Transmission Mounts

    This is the GenRight LS Engine and 4L80 Transmission Mounts for the GenRight Off Road JK Elite Suspension. These are the same designed parts we use on the GenRight Terremoto Jeep Wrangler JKU as part of the GenRight Elite Suspension System. Perfected...

    $799.99
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Elite Axle Side Trac Bar Mount (2 or 4 Door JK)

    This is a Heavy Duty GenRight axle side Trac Bar mount from the Elite Suspension system or the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) or Dynatrac front axles. It keeps the front axle under...

    $99.99
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
  • The GenRight Off Road Jeep JKU Complete Rolling Chassis with Elite Suspension System *NOTE Plumbing, Transmission, Engine, and Transfer Case NOT Included. *NOTE Plumbing, Transmission, Engine, and Transfer Case NOT Included. *NOTE Plumbing, Transmission, Engine, and Transfer Case NOT Included. Tony just proved the performance and durability of the GenRight Elite suspension system!

    GenRight

    Jeep JK Elite Complete Rolling Chassis

    This complete rolling Jeep Wrangler JKU chassis is outfitted with GenRight's KOH race proven Jeep JK with the best in class Elite Suspension System installed. The chassis includes a complete JK Elite suspension system (installed by our craftsmen), 2.5"...

  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
  • GenRight's Hi-Steer Arm for the Elite Suspension Here is the arm on the Currie knuckle with heim steering Here you can see the hi-steer arm on the Currie axle and knuckle.

    GenRight

    Hi-Steer Arm for Currie RockJock Knuckle

    This is the GenRight modified Currie Hi-Steer arm. It has been modified to have the correct geometry to work with the GenRight JK Elite Suspension System. It positions the drag link in the proper location to match the pitman arm length so you can...

    $349.99
  • JK Elite Rear axle brackets for 3" tube (RockJock 60) Here is how all the pieces nest together. JK Elite Rear axle brackets for 3" tube (RockJock 60)

    GenRight

    Rear Axle Side Bracket Kit for RJ60 (3" tube)

    This is the GenRight REAR Axle Side Bracket Kit for a Currie Rock Jock 60 with 3" diameter axle tubes. The mounts were designed as part of the GenRight Elite Suspension System and need to be located and welded to the front axle. Features:...

    $449.99
36 of 54 Items