null

MADE IN THE USA

The best of the best when it comes to durability, reliability, and performance.

These are the products that we have Trail Tested & Race Proven for over 10 years.

 

  • JK Elite rear bump can mounts Here you can see the bump cans welded into place on the rear shock towers. Here is what it looks like when finished.

    GenRight

    JK Elite Rear Bump Can Kit (Pair), 4 door

     This is the GenRight rear bump stop kit for the Rear JK Elite Suspension System. These Bump Stops "cans" fit in a KING 2.0" diameter air bump can. FEATURES: A must for running coil over shocks. Designed to "key" into the GenRight JK Rear...

    $299.99
  • Bilstein 2.0 Air Bump, sold each

    Bilstein

    Bilstein M 9100 Air Bump 2” Stroke (Sold Each)

    This is the Bilstein 2.0" diameter Air Bump (aka: hydraulic bump stop). It has a 4" stroke and is tunable & rebuildable. Used by most of the competition vehicles for it's performance characteristics, it is perfect for additional suspension...

    $254.99
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
  • GenRight's aluminum fuel filler bezel Installing the bezel on the side of a Jeep JK Fits the Dry Break quick fill perfectly Removable cap for filling when dry break is not available.

    GenRight

    Aluminum Fuel Fill Bezel

    This is an aluminum fuel bezel for the DBC-400 dry break (quick fill). Originally intended for use with the GenRight Race legal Fuel Cell, but it can be adapted to the side of any vehicle. This is the same thing we use on the GenRight Terremoto Jeep JK...

    $199.99
  • VPP1001 - GenRight Vented Power Steering Pulley The GenRight Underdrive pulley spinning and pushing air over the pump GenRight Vented Power Steering Pulley - Red GenRight Vented Power Steering Pulley - Blue

    GenRight

    Vented Power Steering Pulley

      This is not just eye candy... Big tires and tough trails will make your power steering pump work hard and get incredibly hot! Hot fluid will dramatically shorten the life of the fluid and the pump. GenRight's vented power steering pulley has...

    $199.99
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
  • Single high amp electric fan control unit (on & off)

    Griffin

    Universal Wire Harness for Cooler Fan

      This is a heavy duty universal single Electric Fan Wiring Harness. Installs and operated independent of your vehicles ECU. 100% controlled by an automatic inline temperature switch. Includes: Works on water or oil coolers. 185 Deg...

    $178.00
  • This is a Non-electric line lock, parking brake, emergency brake We offer two different mounting styles for your application A mounting style for this line lock, parking brake B mounting style for this line lock, parking brake Technical specifications for mounting this hydraulic ball valve

    GenRight

    Ball Valve Parking Brake

    This is a simple (non-electric) hydraulic ball valve assembly that can be used as an inline parking brake. How does it work? You simply step on the brake pedal and turn the lever. It then locks the pressure in the brake line (as if you were...

    $179.99 - $189.99
  • 6-bolt PRP "flat" Leather Steering wheel PRP wheel shown here in GenRight Terremoto Jeep Wrangler JKU Pictured here with GenRight quick release hub on the Flat PRP wheel

    PRP

    PRP Leather Flat Steering Wheel

      PRP’s Steering Wheels are Built for Off-Road. Constructed from high strength aluminum, with a matte black finish for extra durability… and to make it look cool. The steering wheel has 6 point bolt pattern, specifically chosen because...

    $169.99
  • 16307 Fuel Pump Wire Harness, heavy duty, Aeromotive

    Aeromotive

    Aeromotive Wire Harness to run Fuel Pump

      This is the heavy duty Aeromotive wire harness to run an aftermarket (high volume & high pressure) fuel pump. Are you considering to switch to EFI or swapping in that late model motor? What has recently become the hottest trend in hot...

    $164.95
  • 6-bolt PRP "flat" Suede Steering wheel Shown here in GenRight Terremoto Jeep Wrangler JKU Pictured here with GenRight quick release hub on the wheel

    PRP

    PRP Suede Flat Steering Wheel

    PRP’s Steering Wheels are Built for Off-Road. Constructed from high strength aluminum, with a matte black finish for extra durability… and to make it look cool. The steering wheel has 6 point bolt pattern, specifically chosen because it...

    $159.99
  • GenRight JK Roll Cage A-Pillar to Frame tie in kit.

    GenRight

    JK A-Pillar to Frame Option for GenRight Roll Cage

    This is Cage to Frame upgrade/option for the GenRight roll cage A-pillar upgrade. This is for the guy who is racing or wants the most safety by tying the A-pillar of the cage to the Jeep's frame. This is the same thing Tony has in his Terremoto...

    $149.99
  • Sale
    PRP 5.3 Harness in Black

    PRP

    PRP 5.3 Harness, Black

      This is the PRP black on black 5.3 point harness! This is a 3" wide strap 5 point harness with sewn in shoulder pads that stop chaffing on the neck and adds extra comfort, especially on long rides off-road. Includes all black hardware for...

    $149.99
  • Factor 55 Flat Link in Red The flatlink is available in these colors Factor 55 FlatLink Pictured here on our Terremoto Jeep JK This is how a Factor 55 Flatlink is used Prolink and Flatlink side by side

    Factor 55

    Factor 55 Flat Link

    This is the Factor 55 Flatlink. It is machined from Billet 6061-T6 aluminum alloy and MADE IN USA. Eliminate the conventional winch hook and replace it with a safer and stronger FlatLink shackle thimble and D-ring.   The FlatLink shackle...

    $146.00
  • Aeromotive 340 Stealth in-tank pump kit contents Close up of Aeromotive 340 Stealth in-tank pump Aeromotive 340 Stealth in-tank pump application chart Aeromotive 340 Stealth in-tank pump spec sheet Aeromotive 340 Stealth in-tank pump drawing with dimensions

    Aeromotive

    Aeromotive 340 Stealth In-tank Fuel Pump w/sock

      This is the Aeromotive brand 340 Stealth In-tank Fuel Pump. Great upgrade for for better pressure and volume on any EFI engine (LS or Hemi). This is the same fuel pump we run on the GenRight Terremoto JKU. Features and Specifications: 340...

    $144.95
  • Aeromotive Filter 12301 Aeromotive Filter 12301 has a changable element Showing how to plumb set up in a dual phantom pump system Aeromotive Fuel Filter is shown here on Terremoto JKU on left side (in black).

    Aeromotive

    Aeromotive Fuel Filter 10 Micron, 12301

      This is the Aeromotive 10 micron Fabric Filter Assembly (P/N 12301). A cheap insurance policy to protect your investment, proper filtration is key to fuel system performance. Engineered filter solutions are required to achieve protection...

    $138.95
  • DEI Floor and Tunnel Shield DEI Adhesive Backed Heat Shield on the firewall DEI Floor and Tunnel Shield

    DEI

    DEI Floor & Tunnel Shield 48 x 42

    This is the DEI brand of Floor and Tunnel Shield material for your vehicle. Size is 48" wide x 42" x 3/16" thick. SKU: 050503 This is the same product we use on all our GenRight Jeeps to keep the floor from getting burning...

    $124.99
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
  • Simple DIY plates that bolt on to check the alignment Alignment tool bolted to front hub Close up of multiple bolt patterns. Close up of the 3 bolt pattern sizes this tool fits View of tool from back side

    GenRight

    DIY Alignment Tool

    This is a pair of Alignment Plate "Tools" for the DIY guy. Simply bolt on to the front hub and check the front side and back side with a tape measure to see how much the toe in or toe out you have.FEATURES include: Precision laser cut and formed...

    $119.99
  • Aluminum Aeromotive Fuel Filter (p/n 12301) mount Showing how to plumb set up in a dual phantom pump system Aeromotive Fuel Filter is shown here on Terremoto JKU on left side (in black).

    Aeromotive

    Aeromotive Fuel Filter Mounting Bracket, 12305

      This is the Aeromotive Fuel Filter Mounting Bracket (P/N 12305). An easy mounting solution. This the same in-line filter we use on the GenRight Terremoto Jeep JKU. SPECS: Holds the 12301 Fuel filter assembly. CNC-machined from...

    $118.95
  • GenRight's Needle Bearing Roller to protect your Tie Rod Needle Bearing Roller for your Tie Rod Installed on the front diff cover, prevents the tie rod from getting bent

    GenRight

    Needle Bearing Roller for Tie Rod

    Have you ever bent your tie rod? Well that is because it's so long and only supported on either end. This is a Roller Bearing which is mounted on the front diff cover and effectively shortens the length of the tie rod. Thereby supporting the tie rod...

    $99.99
  • GenRight aluminum foot rest Foot rest parts GenRight's aluminum foot rest Aluminum foot rest Aluminum foot rest for passenger

    GenRight

    Universal Aluminum Foot Rest

    This is the GenRight Off Road aluminum foot rest. These are great for a passenger to push themselves back in the seat in rough terrain. It is universal and can be used in any off-road vehicle where the passenger wants a foot rest...

    $99.99
  • .250" think wall DOM material is perfect for lower links

    GenRight

    CrMo Tubing, 1-3/8" x .188" wall x 60"

    This is 1.375" (1-3/8) diameter x .188" (3/16) thick wall x 60" CrMo seamless tubing. Same thing we use on our GenRight Steering kits for our Long Travel Suspension kits. Perfect for your steering Tie Rod. You cut to the length you need for your...

    $93.00
  • JMXL16T Super Heavy Duty 1-1/4" -12 FK Rod End

    FK Rod Ends

    1-1/4"-12 FK Heim Rod End (Choose Thread)

    This is a genuine FK Heim, it is the only thing we will use on our Jeeps and off-road racers. These are American Made and fully CrMo (aircraft grade) 1-1/4" shank with 12TPI and 1" bore (through the ball). The amount of rotation in...

    $89.99
  • STK-5755 Hi Steer Knuckle Double Shear Kit Close up of how the kit ties the hi-steer arm and ear on factory knuckle together Shown here with GenRight drag link correction kit and coil over shocks Shown here on a Dana 60 with coil springs, tie rod is lower Simply drill the taper out of the cast iron knuckle with a 3/4" drill bit

    GenRight

    Hi Steer Knuckle Double Shear Kit

    This is the GenRight Kit to Double Shear your steering on your Dana 60 Hi-Steer Knuckles (just like we do on the GenRight Jeep builds). It is a perfect compliment to our CrMo Hi-Steer Tie Rod and Drag Link kit and can be cut to fit any...

    $89.99
  • RSMX12 FK Heim Rod End, right hand with 3/4" bore The same FK rod End we use on the tie rod in every GenRight Hi-steer kit Same FK Heims we run on our KOH Ultra4 race buggy! Close up of the same FK Heims we run on our KOH Ultra4 race buggy! 7/8"-14 FK Heim Rod End (Choose Thread)

    FK Rod Ends

    7/8"-14 FK Heim Rod End (Choose Thread)

    This is an American Made fully CrMo (aircraft grade) 7/8" shank x 3/4" bore Heim. The amount of rotation in this rod end is perfect for your steering tie rod (not drag links), because the tie rod does not need hi-misalignment spacers...

    $69.99
  • Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube. (Jack not included) Full kit parts, mounts, velcro strap, and hardware (U-bolts optional) Scissor Jack mod kit (Jack not included) Scissor Jack mod kit, weld on or bolt on (Jack not included) Scissor Jack mod kit shown with optional U-bolts to clamp to roll cage tube (Jack not included)

    GenRight

    HD Scissor Jack Mod/Mounting Kit

    This is the GenRight Off Road manufactured Scissor Jack Kit. Why the Scissor Jack? It has a better range (compressed & extended) over a bottle jack or floor jack.  Where this matters is if you are running big tires and get a flat, as you...

    $69.99
  • DEI plug wire heat protection DEI Packaging for this product

    DEI

    DEI Spark Plug Wire Heat Sleeves - 8 pieces

    This is the DEI brand of Protect-A-Boots, Heat Protection for your spark plugs and wires. SKU: 010542 This is the same product we use on all our GenRight Jeeps to keep the floor from getting burning hot! FEATURES: Set of 8 protective...

    $67.99