null

MADE IN THE USA

The best of the best when it comes to durability, reliability, and performance.

These are the products that we have Trail Tested & Race Proven for over 10 years.

 

  • Aeromotive 15672 Y-Block Showing set up in a dual phantom pump system

    Aeromotive

    Aeromotive -6 AN Y-Block, 15672

      This is the Aeromotive Y-Block with -6 AN fittings. CNC-machined from 6061-T651 billet aluminum alloy for strength and light weight. These Aeromotive Y-blocks are a good looking and effective way of splitting one fuel line into two (dual fuel...

    $61.95
  • GenRight Ram Mounting Tabs for Currie Axle and Hi-Steering Shaped to fit the Currie fabricated diff cover Perfect fit and location to our 1-3/8" diameter CrMo tie rod. Perfect fit and location on the Currie diff cover Here you can see how both hold the ram in the perfect location.

    GenRight

    Ram Mounting Tabs for Currie Axle

    This is a set of Ram Mounting tabs developed & made by GenRight Off Road. These are the same tabs we have used on all our builds like our Terremoto and the Growler Jeep Wranglers. One pair of tabs is made to fit the front diff cover of a Currie...

    $60.00
  • GenRight dash V-bar for the Jeep JK & JKU roll cages How the dash v bar looks after being installed. V-bar lines up with overhead tubes Front view shows how the dash V-bar ties into the upper tube Here you can see how all the cage "nodes" tie together for optimal strength

    GenRight

    Jeep JK Dash V-Bar Add on for GenRight Cages

    This Jeep JK Dash V-Bar Add on is meant for use with the GenRight Roll Cage for 2 and 4 Door Jeep JK's. The V-Bar is an important connection between the dash cross bar and the upper cage cross bar, to add additional strength and rigidity. Used in...

    $59.99
  • Aeromotive Fuel Pressure Gauge Showing ideal plumbing set up for a Aeromotive dual phantom pump system Pictured is in Terremoto JKU, the Aeromotive regulator is on the right side

    Aeromotive

    Aeromotive Fuel Pressure Gauge, 15633

      This is the Aeromotive Fuel Pressure Gauge (P/N 15633). Gauge, Fuel Pressure, 0-100 psi, 1 1/2 in., Analog, Mechanical, Liquid Filled, White Face, Each Specs: 1-1/2" Face Liquid Filled White face. 0-100 psi range (most EFI systems...

    $51.95
  • GenRight's Differential Skid Plate Guard for the Currie Rock Jock Rock Jock 60 & 70 Differential Skid Plate Guard Installed here on our Terremoto Jeep JK front axle, it keeps the bolts protected Shown here on our Jeep rear axle, it keeps the Jock Strap skid from getting ripped off We have used this Guard to protect the leading edge & bolts on our Rock Jock for years!

    GenRight

    Chin Strap for Currie 60 or 70 Diff Skid Plates

    Have you ever ripped off the bolts that hold the diff skid on your Rock Jock axle? Well after going through the trouble to dig out the busted off bolt you will want this! This is our "Chin Strap". It is a Guard GenRight developed from racing at KOH...

    $49.99
  • DEI 2" wide x 50' long Titanium exhaust wrap roll Here is a close up of exhaust from both sides of our V8 into the merge We wrap the entire exhaust with DEI wrap on our Jeeps! We wrapped the CAT and Muffler to keep heat from cooking the floor

    DEI

    DEI Heat Wrap Titanium - 2" x 50'

    This is the DEI brand "Titanium" wrap material for your exhaust system. Size is 2" wide x 50' roll. SKU: 010127 This is the same product we use on all our GenRight Jeeps to keep the floor from getting burning hot! FEATURES: Withstands...

    $49.99
  • GenRight's Medium sized  Billet Tow Point Detailed dimensions for this Tow Point Sideview of GenRight Off Road tow point (shackle tab) Shown after 100% MIG welding to a 3/16" thick mounting plate. We offer three different shapes.

    GenRight

    Tow Point, Medium (Each)

    This is a top quality D.I.Y. Medium sized Tow Point from GenRight Off Road. They are Billet Machined from Cold Rolled steel plate. They are perfect for mounting 7/8" D-rings on your vehicle. These are the some tow points we use on our GenRight rear...

    $40.00
  • TJ or LJ Factory style Hood Latches

    GenRight

    TJ Hood Latches, Black (Factory Style)

    This the original style rubber Jeep TJ / LJ hood latches.   Very inexpensive factory replacement. A simple bolt-on item, makes the install a breeze for anyone with just basic hand tools. FEATURES: Factory look Black Color...

    $124.99
    $35.99
  • DEI 2" wide x 25' long Titanium exhaust wrap roll and 4 stainless ties Here is a close up of exhaust from both sides of our V8 into the merge We wrap the entire exhaust with DEI wrap on our Jeeps! We wrapped the CAT and Muffler to keep heat from cooking the floor

    DEI

    DEI Heat Wrap Kit KIT Titanium - 2" x 25'

    This is the DEI brand "Titanium" wrap KIT for your exhaust system. Size is 2" wide x 25' roll. SKU: 010123 This is the same product we use on all our GenRight Jeeps to keep the floor from getting burning hot! FEATURES: (4) 8" stainless...

    $33.99
  • Aluminum Aeromotive Fuel Filter (p/n 12701) mount Showing how to plumb set up in a dual phantom pump system Aeromotive Fuel Filter is shown here on Terremoto JKU on left side (in black).

    Aeromotive

    Aeromotive Fuel Filter Mounting Bracket, 12701

      This is the Aeromotive Fuel Filter Mounting Bracket (P/N 12701). An easy mounting solution. This the same in-line filter we use on the GenRight Terremoto Jeep JKU. SPECS: Formed to hold the 12301 Fuel Filer assembly. Black powder...

    $30.95
  • GenRight's Billet Tow Point Detailed dimensions of the shackle tab. Rosette welding from 3/4" hole on the inside. How it looks after 100% MIG welded on. We offer three different shapes.

    GenRight

    Tow Point, Hook Style (Each)

    This is a top quality D.I.Y. Hook style Tow Point from GenRight Off Road. They are Billet Machined from Cold Rolled steel plate. They are perfect for mounting 7/8" D-rings on your vehicle. These are the some tow points we use on our GenRight rear...

    $30.00
  • Large size weld-on shackle tab (tow point) with 7/8" hole. 7/8" GenRight Billet Tow Point Dimensions for the GenRight Off Road Billet Tow Point 7/8" thick cold rolled steel. 100% MIG Welded onto a bumper inside and outside.

    GenRight

    Tow Point, Large (Each)

    This is a top quality D.I.Y. Large size Tow Point from GenRight Off Road. They are Billet Machined from Cold Rolled steel plate. They are perfect for mounting 7/8" D-rings on your vehicle. These are the some tow points we use on our GenRight front...

    $30.00
  • GenRight's control arm mounting clamp GR control arm mounting clamp with tabs bend over and formed around control arm. Close up of clamp on the upper control arm Shown here on the GenRight Terremoto Jeep JK Shown here on the upper link holding brake and vent lines.

    GenRight

    Control Arm Clamp Kit for brake lines and vents

     This is the GenRight Off Road Control Arm (on link) Clamp Kit. It is a super clean way to attach brake lines, ARB air lines, lockers wires and vent lines to your adjustable control arms! We use these on all our GenRight Jeeps. It is...

    $29.99
  • GenRight's Tire Strap Tabs for the Jeep JK or JL Here you can see how they slip over the existing tow point Shown here on the GenRight Terremoto at KOH 2020

    GenRight

    JK Tow Point Tie Down Points

    These plates give you a cool way to hold down a spare tire in the back of a Jeep JK or JL.   The laser cut plates lock down over the rear tow points and allow the hooks of a tire strap to lock into it.   The front edge can be tied down...

    $29.99
  • DEI Stainless Locking Ties for heat wrap

    DEI

    DEI Locking Tie Set w/Tool

    This is the DEI brand locking tie set with tool for securing heat wrap material onto your exhaust system. SKU: 010219 This is the same product we use on all our GenRight Jeeps! FEATURES: (8) 9" long stainless steel ties (4) 14" long stainless...

    $26.99
  • Aeromotive 15609 AN-06 Fitting Showing set up in a dual phantom pump system

    Aeromotive

    Aeromotive -6 AN to -10 ORB Fitting, 15609

      This is the Aeromotive aluminum ORB Fitting. They are used on Aeromotive high pressure fuel systems (pumps, fuel pressure regulators and fuel rails). These AN O-ring adapter fittings are just what you need to connect AN fuel lines to AN O-ring...

    $25.95
  • Replacement fuel filter element 12601 Here you can see what both ends look like of the 12601 filter element Showing how to plumb set up in a dual phantom pump system Aeromotive Fuel Filter is shown here on Terremoto JKU on left side (in black).

    Aeromotive

    Aeromotive Replacement Fuel Filter Element, 12601

      This is the Aeromotive 10 micron Replacement Filter Element (P/N 12601). Aeromotive filter assemblies offer unmatched flow. This the same in-line filter we use on the GenRight Terremoto Jeep JKU. SPECS: High-flow, 10-micron fabric...

    $25.95
  • Torco 75W-140 synthetic gear lube

    Torco

    Torco SGO 75W-140 Synthetic Gear Oil

    We run Torco Synthetics because they are the best! It's what we use in every GenRight built Jeep and Ultra4 race vehicle! SGO is designed to maximize power efficiency and provide the highest level of gear protection under the most severe speed and load...

    $24.99
  • Aeromotive Filter 15605 AN-06 Fitting Showing set up in a dual phantom pump system

    Aeromotive

    Aeromotive -6 AN to -8 ORB Fitting, 15605

      This is the Aeromotive aluminum ORB Fitting. They are used on Aeromotive high pressure fuel systems (pumps, fuel pressure regulators and fuel rails). These AN O-ring adapter fittings are just what you need to connect AN fuel lines to AN O-ring...

    $22.95
  • Torco SR-5R 20W-50 synthetic oil

    Torco

    Torco SR-5R 20W-50 Synthetic Racing Oil

    Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5R utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

    $22.75
  • Torco ATF fluid, full synthetic, Hi Vis

    Torco

    Torco ATF HiVis Automatic Transmission Oil

    HiVis ATF is specially engineered for severe operating conditions encountered in racing, high performance Street and off road use. HiVis is  formulated using 100% synthetic base oils and additive technologies designed to manage extreme loads, high...

    $21.99
  • Torco SR-5R 5W-30 Racing Oil

    Torco

    Torco SR-5R 5W-30 Synthetic Racing Oil

    Developed under the most severe racing conditions, Torco SR-5R offers the highest level of performance and protection for highly modified race engines. SR-5 utilizes Group IV/V synthetic base oil chemistries and additive technologies engineered to...

    $20.85
  • Sale
    DEI 2" wide Titanium exhaust wrap Here is a close up of exhaust from both sides of our V8 into the merge We wrap the entire exhaust with DEI wrap on our Jeeps! We wrapped the CAT and Muffler to keep heat from cooking the floor

    DEI

    DEI Heat Wrap Titanium - 2" x 15'

    This is the DEI brand "Titanium" wrap material for your exhaust system. Size is 2" wide x 15' roll. SKU: 010129 (also available in a 50' roll 010127). This is the same product we use on all our GenRight Jeeps to keep the floor from getting...

    $15.99
  • GenRight Die Cut Vinyl Windshield Decal The same decal Tony runs on the windshield of the Terremoto JK Colors available

    GenRight

    GenRight Die Cut Vinyl Windshield Decal

      Now is your chance to represent GenRight Off Road, your favorite American Made Jeep company! This is the same windshield sticker that Tony and the rest of the GenRight crew run on their Jeeps. FEATURES: Cut from premium 3M vinyl this is a...

    $14.99
  • Torco SR-1r 5W-30 Synthetic Engine Oil

    Torco

    Torco SR-1r 5W-30 Synthetic Engine Oil

    Torco SR-1 Super Street 5W-30 motor oil is a selective cross blend of highly advanced 100% synthetic base oils and proprietary additive systems aimed at increasing power, efficiency and engine protection. Great for the Jeep Turbo JL engines...

    $14.20
  • Threaded Step Bungs (Each) - Multiple Sizes 7/8-14 Weld in bung on a steering tie rod and drag link 1-1/4-12 Weld in bung on a control arm with a flex joint 1/2-20 Weld in bung on the end of a sway bar link

    GenRight

    Threaded Step Race Bungs (Each) - Multiple Sizes

    This is a top quality weld-in tube insert or bung (aka; threaded insert). They are CNC machined from cold rolled steel can be MIG or TIG welded into the end of your tubing. The hex head on the end of the bungs we sell stays exposed after being welded...

    $9.99 - $21.98
  • Torco 8oz grease tube, T300160ZE Torco grease in the GenRight Off Road shop

    Torco

    Torco Multi-Purpose Grease

    This is the Torco Multi-Purpose Waterproof Grease is a lithium complex grease formulated to offer superior lubricating qualities in a wide range of automotive and powersport applications. Excellent waterproofing, shock load protection, extreme...

    $7.99
  • Jam Nuts (Various Sizes), sold each Jam Nut shown here on a control arm with a Johnny Joint Jam nut shown here on steering tie rod and drag link with Heims Jam nut shown here on a sway bar link to lock a heim in place

    GenRight

    Jam Nuts (Each) Multiple Sizes

    Jam Nuts (aka: thin lock hunts) are used to lock (or jam) the threads of a Heim and Johnny Joint in place on sway bar, steering, trac bar or control arms.  They are available in the following sizes: 1/2-20 thread (sway...

    $3.99 - $7.99
  • Dynatrac Pro Rock Dana 80 Rear Axle Dynatrac Pro Rock 80 with a GenRight Elite JK suspension The ProRock 80 looks impressive under a built Jeep! Here you can see the center section size, courtesy of JP magazine

    Dynatrac

    Dynatrac ProRock Dana 80 Rear Axle - Jeep JK

    GenRight is now offering the Dynatrac ProRock axles for our JK Elite Suspension System! This is the Dynatrac ProRock 80™ is the ultimate rear axle upgrade for the Jeep Wrangler JK. Big tires? Big power? No problem! No other axle in existence...

  • Dynatrac ProRock XD60 Front Axle with forged aluminum knuckles Close up of the forged knuckle with GenRight Steering heim Close up of the Dynatrac locking hub How the Dynatrac locking hub works XD60 installing with GenRight Elite JK Suspension

    Dynatrac

    Dynatrac ProRock XD60 Jeep Front Axle

    GenRight is now offering the Dynatrac ProRock axles for our Jeep Wrangler JK Elite suspension systems! The advantages of the all-new Dynatrac ProRock XD60® axle housing include: The axle was designed to hold a larger differential and 10...