null

MADE IN THE USA

About GenRight's Suspension Systems...

• Proven quality, performance and durability.
• Utilize the GenRight gas tank to allow more room or bigger axles.
• Are weld-on for optimal bracket location(s) and so nothing hangs down.
• Move the spring and dampening control out the wheels (in the optimal position).
• Use higher quality thicker materials for long term durability.
• Use proven quality Genuine Johnny Joints (serviceable).
• Utilize Top quality coilover shocks (King, Fox or Bilstein) with GenRight’s spec valving, spring rates and hose routing.
• Are quiet because of the bind free GenRight 3 link front and 4 link rear suspension.
• Keep the steering box for optimal performance! We have our own spec ram assist kits.

• Designed around high pinion Currie axles that are custom built to GenRight’s specs for best durability and performance off-road.

100% American Made!


Turn your TJ into an LJ!

This simple kit will give you the same up travel we offer in our Tracer coil over shock suspension kit.

All parts are key notched (puzzled) to fit together and self fixture for easy assembly by the installer.

When done, your TJ will even take a factory Jeep Unlimited LJ hard top or soft top!

The GenRight Legend Kit is our original suspension designed for the do-it-yourselfer with a CJ, YJ, TJ or LJ. Available in single or double triangulated version. It allows you to do a little bit at a time, pick your own desired wheelbase, axles (brand and width), tire size and drivetrain combo.

 
The GenRight Tracer kit is geometry that was off-road race Inspired, this “system” is designed for the highest level of performance for their Jeep on AND off road. Longer wheelbase, lower center of gravity, without sacrificing suspension travel. Specifically designed for a Chevy LS3 & 4L80 transmission (or stock drivetrain), Currie axles, & Atlas transfer case.


36 of 76 Items
  • Currie Enterprises Rock Jock 70 Front Axle Currie Enterprises Rock Jock 70 Front Axle 1480 U-joints and Hi-Steer Knuckles are standard on Currie front axles Currie 70 on a Jeep JK build Locking Hubs, over sized brakes and double shear high steer knuckles are standard

    Currie Ent

    Currie Extreme 70 Front Axle - Complete

    This is the race proven Currie Extreme 70 Front Axle. This is the same axle Tony has successfully run in our 805HP V8 powered 4400 Class racer for 7 years and his Terremoto JK!  This is a complete axle (but NO mounting brackets), so it's ready...

    $10,599.99
  • Jeep Tj / LJ Legend Suspension Package (Base package pictured) Jeep Tj / LJ Legend Suspension Package (Base package pictured) Turn your Jeep Wrangler TJ into a stable and capable off road machine! Easy to see GenRight Legend kit coil over conversion on the Jeep Wrangler TJ frame. Rear setup with King Coilovers and Air Bumps

    GenRight

    Jeep TJ / LJ Legend Suspension Package

      This is the GenRight "Legend" Coil Over Suspension Package for Jeep Wrangler TJ & LJ (1997-2006) this is the best, most balanced & adaptable suspension system on the market since 2006! This package is also good for a 5"-7" rear...

  • Ram Assist XD Kit from PSC for 38"-42" Tall Tires PSC '95-'02 TJ/XJ/YJ Stage 5 Cylinder Assist Kit

    PSC

    PSC '95-'02 TJ/XJ/YJ Stage 5 Cylinder Assist Kit

      Designed for Extreme Off Highway driving and 38" to 42" tall tires.-Provides double the turning force-Reliefs stress on steering box and frame mounts-PSC ram assist is the ultimate steering stablizerCylinder Assist does not improve your...

    $2,720.00
  • GenRight's Jeep Wrangler TJ "Tracer" Suspension Kit TJ Tracer frame side control arm mounts and skid plate installed Jeff testing the TJ Tracer kit out on the trail TJ Tracer frame side control arm mounts and skid plate installed Good picture of ride height compared to Terremoto

    GenRight

    Jeep Wrangler TJ "Tracer" Suspension Kit

    This is GenRight Off Road's Tracer center section for the Jeep Wrangler TJ, 1997 - 2006. This is a scaled down version of our famous LJ Tracer suspension system which has all the proven suspension geometry from our 4500 Class off-road race Jeep...

    $1,999.99
  • When the TJ to LJ back half kit is assembled it looks like this The Genright Off Road TJ to LJ kit (and YJ). Tub "patch piece" that makes it look like a factory LJ This is the new rear frame tacked into place This is the factory frame to new frame fish plate reinforcement

    GenRight

    TJ to LJ Frame Kit

    This is the GenRight Off Road TJ to LJ Frame Stretch Kit (YJ too).. Do you have a bunch of money invested into your Jeep TJ, but wish it was an LJ for the longer wheelbase and increased cargo area? Now you can take any Jeep TJ or YJ (previously...

    $1,999.99
  • All new aluminum cargo area for your Jeep TJ Integrated fuel pump access panel into new cargo area floor New fender wells use the corner guard bolts to hold them in place (no extra holes to be drilled) Cargo area body mounts to the frame are maintained and support the rear floor This is how it looks after cutting out the stock cargo area floor.

    GenRight

    TJ to LJ Cargo Area Kit

    This is our TJ to LJ Cargo Area Kit for our TJ to LJ Frame Stretch Kit. Hide all the cut and stretched sheet metal with this high quality aluminum cargo area interior. It is easy to install, because it uses all the same holes that your GenRight corner...

    $1,899.99
  • All new aluminum cargo area for your Jeep TJ The GenRight Growler YJ stretched to LJ length. Integrated fuel pump access panel into new cargo area floor New fender wells use the corner guard bolts to hold them in place (no extra holes to be drilled) Cargo area body mounts to the frame are maintained and support the rear floor

    GenRight

    YJ to LJ Cargo Area Kit

    This is our YJ to LJ Cargo Area Kit to go with our YJ/TJ to LJ Frame Stretch Kit. Hide all the cut and stretched sheet metal with this high quality aluminum cargo area interior. It is easy to install, because it uses all the same holes that your...

    $1,899.99
  • Currie short arm suspension kit for the Jeep TJ or LJ

    RockJock

    Suspension Lift Kit for the Jeep TJ/LJ, CE-9100A

    This is the top quality Rock Jock suspension kit (designed by John Currie). It includes a complete set of 8 genuine Johnny Joint® Control Arms for the 1997-2006 Jeep TJ's and LJ's. All arms are heavy duty and fully adjustable allowing...

    $1,850.00
  • Jeep TJ/LJ/YJ/CJ-7 Rear 4-Link Rear Kit Jeep on the trail with GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links Detail view of GenRight Off Road's Jeep TJ/LJ/YJ/CJ Rear 4-Link Rear Kit w/ Links

    GenRight

    Rear 4-Link Kit (Links Optional)

    Triangulated Rear 4-Link Kit for Jeep TJ, LJ, YJ & MoreBind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable Have you been thinking about building your own kit from scratch, or just upgrading to improve the ride quality of...

    $1,499.99 - $2,499.99
  • Sale
    High Capacity Fuel Tank for the Tracer Suspension View of the axle side of the High Capacity Fuel Tank for the Tracer Suspension Side view of the High Capacity Fuel Tank for the Tracer Suspension 100% TIG Welded 1/8" thick Aluminum Tank Here you can see the fit using a Currie 70 rear axle and the 6053 tank

    GenRight

    26 Gal Gas Tank for Tracer Susp w/7" Stretch

    This is the larger capacity fuel tank is designed to work with the GenRight Tracer Suspension System in a stretched Jeep Wrangler LJ. Fully assembled and designed to accept the factory Jeep 05-'06 fuel pump module (or the Aeromotive Phantom in-tank fuel...

    Was: $1,949.99
    Now: $1,749.99
  • Jeep TJ/LJ/YJ/CJ-7 Front 3-Link Kit GenRight Front 3-Link w/ Links Installed on Jeep TJ GenRight Front 3-Link w/ Links Installed on BowTie GenRight Front 3-Link Suspension Kit (Skid Plate not Included)

    GenRight

    Front 3-Link Kit (Links Optional)

     Front 3-Link Kit for Jeep TJ, LJ, YJ & More Bind-Free | Street Worthy | Trail Tested | Optimized Geometry | Customizable This is the 3 Link kit from our Legend Suspension kit. It is called 3 link, but is technically a 4 link when you include...

    $1,599.99 - $2,349.99
  • KING 2.5" Shocks, w/Clicker RES, TJ Front 0"-2" Lift

    King Shocks

    KING 2.5" Shocks, w/Clicker RES, TJ Front 0"-2" Lift

      This is the 2.5" King Shock with remote reservoir and compression adjusting knob for the Jeep TJ FRONT with a 0 - 2" lift.   King’s new line of Original equipment manufacturer, (OEM), shock upgrade kits provide a bolt on suspension...

    $1,299.99
  • GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts. Here you can see the GenRight CrMo Tie Rod & Drag Link with 7/8" Heims and 3/4" Bolts installed. GenRight's CrMo Tie Rod and Drag Link with 7/8" Heims and 3/4" Bolts on a Dynatrac ProRock GenRight's CrMo Tie Rod and Drag Link on a Currie RockJock 60 STK-8750 CrMo Tie Rod and Drag Link kit on a Currie Rock Jock 60 w/aluminum knuckles

    GenRight

    Chromoly Tie Rod & Drag Link Kit - 3/4" Bolts

    This is the GenRight "builders" steering (Drag Link and Tie Rod) kit. It is a perfect compliment to our Front 3 Link suspension kit and can be cut to fit any vehicle (including a Jeep JK, TJ, LJ, CJ or YJ) or axle width and...

    $999.99 - $1,029.98
  • GenRight Billet twisted pitman arm Heat Treated Chromoly provides incredible strength and durability. GenRight Billet twisted pitman arm Arm is twisted for optimal geometry GenRight Billet twisted pitman arm

    GenRight

    Billet Chromoly Twisted Pitman Arm

    This is the new and innovative GenRight Billet Twisted Pitman Arm that allows for 3.5" more up travel. This arm was designed as part of our new low ride height TRACER Suspension system for the Jeep LJ. It corrects the angle issues inherent in...

    $899.99
  • Jeep LJ Tracer Stretch Corner Guard Set - Aluminum Here is how it works, we move the entire wheel opening back 4" Shown here with a EXT flare to move the axle even further back!

    GenRight

    Tracer Stretch LJ Corner Guard Set - Aluminum

    This is the Aluminum "Full" type Corner Guard for the UnlimitedJeep Wrangler LJ with STRETCH FENDER WELL location for the GenRight Off Road TRACER suspension. Features: Laser cut and shape is formed with a custom "one hit" die to assure a...

    $899.99
  • GenRight Off Road Rear Sway Bar Kit for the Jeep TJ, LJ or YJ Jeep Rear Sway with coil over shock at full droop. Here you can see frame mount for rear sway bar with (white) bearing. Here you can see the axle side mounting and how link fits.

    GenRight

    TJ/LJ/YJ Sway Bar Kit - Rear

      This is the GenRight rear sway bar kit to fit a Jeep TJ, LJ or YJ. This kit was designed to add stability to your lifted or long travel Jeep. It is a weld-on kit. Our sway bar is about 30% stiffer than other brand Anit-Rock type...

    $849.99
  • GenRight Off Road Rear Sway Bar Kit for the Jeep LJ with Tracer Suspension Shown here installed on Jeep LJ frame with GenRight Tracer Suspension System

    GenRight

    Tracer Jeep LJ Rear Sway Bar Kit

      This is the GenRight rear sway bar kit to fit our "Tracer" Jeep LJ Suspension Kit This kit was designed to add stability to your lifted or long travel Jeep Wrangler LJ. It is a weld-on kit. Our sway bar is about 30% stiffer than...

    $849.99
  • 3 Link Front & 4 Link Rear Bracket Package

    GenRight

    3 Link Front & 4 Link Rear Bracket Package

      This is a "builders" PACKAGE with a 3 Link front and 4 Link rear suspension bracket kit(s).   This is your chance to get extra $$$ OFF our normal good deal!Designed to fit a TJ or YJ (but can modified to fit a CJ), this is...

    $799.99
  • GenRight's double triangulated rear cross member for a Jeep TJ Shown here being installed on a Jeep TJ Shown here with GenRight cross member kit and ASP-390 T-case support Shown here with GenRight BKT-1050 cross member kit and ASR-390 Extra plates reinforce the inside and bottom of the Jeep frame

    GenRight

    Double Triangulated 4 Link Crossmember Kit

    This is the GenRight Off Road design DOUBLE Triangulated 4 link cross member "only" kit for a Jeep TJ or YJ.Ideal to make your rig a top notch rock crawler with awesome articulation.We have figured out all the mounting points to optimize suspension...

    $799.99
  • GenRight STK-2503 Drag Link Correction Kit GenRight's Drag Link Correction Kit installed

    GenRight

    Drag Link Correction Kit

    This is the GenRight Drag Link Correction Kit with heims rod ends. This kit will correct the angles and issues inherent in long travel front suspensions (issue being; not enough down travel on the drag link heims when both pitman arm and...

    $799.99
  • Jeep TJ/LJ Heavy Duty Trac Bar Kit Axle Side of the TJ Trac Bar Bracket Shown here is how the backside of the bracket boxes in around the frame too. Shown here with Twisted pitman arm and mounted on the side of the TJ frame. Laser cut plates show how the mount box around the Jeep TJ frame.

    GenRight

    Jeep TJ & LJ Heavy Duty Trac Bar Kit

    This is the Heavy Duty GenRight Front Trac Bar Kit to keep the front axle under your Jeep. The materials used are twice as thick as stock! This builders kit comes with the Johnny Joint pre-welded on one side and the tubing...

    $649.99
  • KING 2.0" Emulsion Coilover Shock An o-ring on the cap keeps dust and dirt from contaminating the valve Tapered spring cup for more clearance during articulation Single allen pinch bolt to release the preload collar. Shown here on the front of a Jeep Wrangler.

    King Shocks

    KING 2.0" (14" Stroke) Emulsion Coilover Shocks

      This is the KING Brand of 2.0" diameter Coil Over Shock, without remote reservoir. These are the best and most quiet coil over shocks you can buy. KING Shocks have a great name in the off-road world. They build an extremely high...

    $634.99
  • GenRight's 3/4" CrMo Tie Rod Steering, STK-5750 CrMo tie rod with 7/8" Heims on a Dynatrac front axle Here is how you make it double shear CrMo tie rod with 7/8" Heims on a Currie front axle CrMo tie rod with 7/8" Heims on a Currie Rock Jock 60 front axle

    GenRight

    Chromoly Tie Rod Kit - 3/4" Bolts

    This is the GenRight Tie Rod kit. It is a perfect upgrade for any vehicle with Dana 60 or bigger front axle. This kit is made up of the best component available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $549.99 - $579.98
  • Universal GenRight Trac Bar with Currie Johnny Joint on one end and Heim on the other Shown here mounted using the GenRight frame side bracket and a Gr8 9/16" bolt

    GenRight

    Heavy Duty Trac Bar, Only

    This is the Heavy Duty GenRight Front Trac Bar ONLY (mounting brackets sold separately).This product is still considered part of our "builders" product line, since it requires the end user to properly cut it to size and weld in the threaded...

    $549.99
  • GenRight 5/8" CrMo Tie Rod Builders Kit, STK-5625 GenRight Heim style High Steering on Dana 44 knuckles

    GenRight

    Chromoly Tie Rod Kit - 5/8" Bolts

    This is the GenRight TIE ROD kit, it is a perfect upgrade for any vehicle with a Dana 30 or 44 front axles. This kit is made up of the best components available! This Heavy Duty kit will hold up to big tires and off-road abuse. Got a...

    $499.99
  • Twisted pitman arm and the twisted mount for the hi-steer arm. Closeup of the mount on a hi-steer arm Here you can see how both are twisted to improve range of motion Includes a plastic cap to protect the internal threads on the pitman arm

    GenRight

    Twisted Pitman & Hi-Steer Mount

    This is the GenRight Twisted Pitman Arm and Hi-Steer Arm Mount for drag links with heims on both ends. It includes our Twisted Pitman Arm and our Hi-Steer Arm Mount kit to correct the angle issues inherent in long travel front...

    $499.99
36 of 76 Items