null

MADE IN THE USA

phone: (805) 584-8635

Suspension

Our suspension kits have been developed over 10 years, 480 trails, countless vehicles, and multiple King of the Hammers races. We have taken our knowledge and transformed it into packages to provide our customers with the best suspension available in the industry. This includes a variety of products ranging from complete 3 or 4-link suspension to individual brackets and tabs for the DIY fabricators, both of which will save you time and money.

180 of 229 Items
  • Bilstein 2.0 Air Bump, sold each

    Bilstein

    Bilstein M 9100 Air Bump 2” Stroke (Sold Each)

    This is the Bilstein 2.0" diameter Air Bump (aka: hydraulic bump stop). It has a 4" stroke and is tunable & rebuildable. Used by most of the competition vehicles for it's performance characteristics, it is perfect for additional suspension...

    $254.99
    Add to Cart
  • GenRight's Dana 60 Rear Axle Bridge, Un-Welded Rearview of Dana 60 Rear Axle Bridge on a 4 link set up. Dana 60 Rear Axle Bridge, with upper links. Basic dimensions so you can verify it will fit your application

    GenRight

    Rear Axle Bridge, Dana 60 Un-Welded

    If you are Triangulating (or linking) the suspension on your Jeep, you will need a "Bridge" (or Truss) above the differential housing on the rear axle to mount the upper control arms. This is GenRight's low profile Rear Axle Bridge...

    $249.99
    Add to Cart
  • SUP-1001 GenRight's front axle bump stop pad kit This is how it looks when the pieces are tacked together Shown here installed with GR Urethane bump stop Rear view of the driver side bump stop mount Side view of the driver side bump stop mount

    GenRight

    Universal Front Bump Stop Pad Kit

    This is the GenRight FRONT bump stop "pad" kit. It is a simple way to get bump stops on the front of your coil over shock Jeep! Since space is limited on the front axle, we designed a combo lower control arm mount with bump stop pad kit. Designed...

    $249.99
    Add to Cart
  • GenRight's Short Rear Shock Towers, RSM-1000 Shown here is an outboard shock tower with remote res Raise up the entire shock and move it outboard for better dampening control Another mounting solution with this rear shock tower

    GenRight

    Universal Outboard Rear Shock Tower Kit, Short

      This is a SHORTER and thinner version of our RSM-1001 outboard rear shock towers for the Jeep Wrangler TJ, Jeep LJ, Jeep YJ or CJ-7. It is designed to accept 2.0" shocks. It is a perfect way to convert your rig to outboard...

    $249.99
    Add to Cart
  • GenRight Off Road's Universal Transmission Crossmember Kit Side view of the GenRight cross member holding trans and t-case in a Jeep build. Close up of the Urethane mount & tabs on each side of this universal cross member kit. Weld the tabs to the inside of the frame so there is clearance for your exhaust. GenRight BKT-1050 in '06 LJ Rubicon with the 6 speed manual.

    GenRight

    Universal Transmission Crossmember Kit

      This is a DIY (do-it-yourself) Universal Cross Member Kit to hold up your transmission (or transfer case). We have designed this kit to be compatible with a wide variety of engine and transmission configurations used in off road Jeeps. The...

    $249.99
    Add to Cart
  • Automatic Transmission mount for 2012 and Up on the front cross member

    GenRight

    JK Transmission Mount, '12 - '17

    This is a Automatic Transmission Mount for the GenRight JK Elite Suspension System for a 2012 to Present Jeep JK. It is used to hold up your transmission (and transfer case), independent of your vehicle's belly skid plate. We have designed this to be...

    $219.99
    Add to Cart
  • 1" Engine Lift mounts are urethane bushed

    RockJock

    1" Motor Lift, TJ/LJ/YJ

    This is a 1" lifted motor mount(s) to fit a 1987-2006 Jeep TJ/LJ/YJ vehicles equipped with the 4.0L (or 4.2L) 6 cylinder engine. These specially designed motor mounts lift the front of the engine one inch which produces a reduced driveline angle on...

    $199.99
    Add to Cart
  • GenRight's aluminum fuel filler bezel Installing the bezel on the side of a Jeep JK Fits the Dry Break quick fill perfectly Removable cap for filling when dry break is not available.

    GenRight

    Aluminum Fuel Fill Bezel

    This is an aluminum fuel bezel for the DBC-400 dry break (quick fill). Originally intended for use with the GenRight Race legal Fuel Cell, but it can be adapted to the side of any vehicle. This is the same thing we use on the GenRight Terremoto Jeep JK...

    $199.99
    Add to Cart
  • Sale
    1-3/4" Daystar puck lift Shown here with 35" tires (using only the 1-3/4" puck lift and GenRight tube fenders)

    Daystar

    Daystar 1-3/4" Lift Kit for the Jeep Wrangler JK

    This is the Comfort Ride system from Daystar. It will raise the front & rear the JK Wrangler 1¾" for a level vehicle stance. It installs easily with no welding or drilling. It will maintain factory ride quality. The kit comes complete...

    $199.99
    Add to Cart
  • BMT-8051 Heavy Duty Body Mount Kit for Jeep Wrangler JKU Heavy duty body mount welded onto the stock frame Passenger side body mounts welded on HD Body Mounts welded and ready for paint

    GenRight

    Heavy Duty Body Mount Kit for Jeep JK

      This is a Heavy Duty body mount kit from GenRight Off Road. Designed for the Jeep Wrangler JKU (2007 - 2018). It replaces the thin stock body mounts that are easily smashed and deformed over years of off-roading. These new mounts...

    $199.99
    Add to Cart
  • Jeep JK/TJ/LJ/YJ/CJ Rear Bump Stop Pad Kit SUP-1002 Rear Bump Stop Pad Kit (Assembled, Unwelded) Close up of the GenRight rear bump pad with 14" coil over shock Here you can see how the bump pads engage with the bump stops when flexed Another view on the bump pad mounted on rear axle

    GenRight

    Universal Rear Bump Stop Pad Kit

    This is the axle side, lower bump stop "pad" from GenRight Off Road. A simple and low cost solution for bump stops on your Jeep. Here is how it works: This kit can be installed with our Urethane Bump Stops or King/FOX Shocks 2.0" air bump,...

    $199.99
    Add to Cart
  • BMT-2001 GenRight's Hi-Clearance Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame After - with GenRight hi-clearance body mounts on the frame Close up of the new GenRight BMT-2001 body mounts on the frame Easy to see the difference in this picture!

    GenRight

    Body Mount LIFT Kit, TJ / LJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on both sides (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • BMT-4001 GenRight's Hi-Clearance Body Mount Kit for the Jeep YJ Here you can see the difference between stock and GenRight's The same body mounts Tony had on his Growler YJ

    GenRight

    Body Mount LIFT Kit, YJ

    This is another innovative and long over due product from GenRight Off Road. It is a new set of hi-clearance body mounts to raise up the 3 mounts on either side (under the rocker guard) that always get hit on trail obstacles! Yes, we designed...

    $179.99
    Add to Cart
  • BMT-2051 GenRight's Heavy Duty Body Mounts for the Jeep TJ or LJ Before - with factory body mounts on the frame

    GenRight

    Heavy Duty Body Mount Kit, TJ / LJ

    This is a Heavy Duty body mount kit from GenRight Off Road. It replaces the stock thin & cheesy body mounts that are easily smashed and deformed. These new mounts are Laser cut from Heavy Duty 3/16" thick plate steel. This model body mount...

    $179.99
    Add to Cart
  • GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Rear View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Front View of GenRight's Rear Axle Bridge for the Dana 44 Axle Housing Basic dimensions so you can verify it will fit your application

    GenRight

    Dana 44 Rear Axle Bridge - Unwelded

    This is a weld-on REAR Axle Bridge for the factory Jeep JK  or JKU Dana 44 rear axle from GenRight Off Road. If you Triangulating (or linking) your Jeep's rear suspension, you will need a "Bridge" (or truss) like this on the rear axle...

    $169.99
    Add to Cart
  • This is how the kit comes, un-assembled This is what the kit looks like after welding GenRight Front 3 Link frame mounting brackets GenRight Front 3 Link frame mounting brackets This is how the frame side 3 link brackets lay out

    GenRight

    3 Link Front Bracket Kit, Chassis side (Unwelded)

    This is what the public has been asking for! A low cost DIY "builders kit" of our popular 3 link Front suspension brackets (not welded). We have figured out all the mounting points for proper geometry (bump steer, anti-squat, etc.) to make your rig a...

    $149.99
    Add to Cart
  • Transmission mount for 2007 to 2011 Automatic Here is a view of the Transmission mount for '07 - '11 on the front cross member.

    GenRight

    JK Transmission Mount, '07-'11

    This is a "Universal" Automatic Transmission Mount for the GenRight JK Elite Suspension System, it is designed to fit the 2007 - 2011 Jeep JK. It comes longer than needed to accept several different transmissions. It is used to hold up your...

    $149.99
    Add to Cart
  • RSM-2150 Rear Coil Spring correction Kit for the Jeep TJ This is the mounting location of the new brackets AFTER GenRight Coil Correction kit is installed BEFORE Coil Correction kit is installed Carefully cut off and clean the frame for the new brackets to be mounted

    GenRight

    Rear Coil Spring Correction Kit

    This is a rear coil spring mounting kit or it can be used as a coil spring correction kit On a Jeep TJ or LJ. This is a low cost way to move the coil spring back on the frame is laser cut and formed from heavy duty 3/16" and 1/4" thick steel and...

    $149.99
    Add to Cart
  • Bump Stop Can, Pair

    GenRight

    Bump Stop Can, Pair

    This is a King Shock manuafacturered AIR BUMP CAN only. Intended for use with a KING 2.0" diameter air bump. But also fits the GenRight Rock Stomper Urethane bumps too!This is a weld-on item.FEATURES: Holds a King 2" Air Bump or GenRight Rock...

    $129.99
    Add to Cart
  • High Clearance Lower Rear Shock Mount Kit

    GenRight

    High Clearance Lower Rear Shock Mount Kit

      This is the lower rear shock mount (axle side) kit. Similar to our outboard rear shock mount kit, but this is only the lower mounts.This is perfect for someone who already has our kit but is changing axles and who does not want to cut...

    $124.99
    Add to Cart
  • Here you can see the slight bends in the 1/4" thick wall CrMo tubing Jeep JK Frame Side Trac Bar from the GenRight Elite 3 Link Suspension kit 1/4" thick frame side mount fits the frame perfectly Shown here how it fits over the steering box frame sleeves. Double shear 9/16" Grade 8 Bolt

    GenRight

    JK Elite Frame Side Trac Bar Mount (2 or 4 Door)

     This is a Heavy Duty Frame Side Front Trac Bar Mount for the Jeep Wrangler JK, from GenRight Off Road.. It is part of our long travel GenRight Elite Coil Over Suspension System. These are the same parts included in our front 3 link kit and the...

    $124.99
    Add to Cart
  • AGM Suspension Slider (Sold Each) Individual components shown Eliminates coil bind by allowing the upper and lower spring to rotate as they compress The AGM slider is made in 3 pieces. AGM Suspension Slider Sizes

    AGM

    AGM Suspension Sliders (Sold Each)

    This is the AGM "Slider", we use it on every GenRight vehicle. It is designed to replace the noisy plastic slider on a King or Fox coil over 2.0", 2.5" or 3.0" shock. The AGM Shock Slider is precision dual rate spring divider designed to keep the...

    $125.99 - $219.99
    Choose Options
  • .250" think wall DOM material is perfect for lower links

    GenRight

    DOM Tubing, 2.00" x .250" wall x 36"

    This is 2" diameter x .250" thick wall x 3' D.O.M. seamless tubing. Same thing we use on our GenRight Long Travel Suspension kits. Perfect for lower control arms. You cut to the length you need. If you want to carry a spare, cut yours...

    $119.99
    Add to Cart
  • Sale
    King Shock Nitrogen Gauge

    GenRight

    King Shocks Nitrogen Gauge

    Now you can accurately adjust the nitrogen in your shocks like a pro!The trick is that there is so little "air" volume in a shock that it requires a special tool like this to do it and maintain the pressure you "think" you put in!This easy to use...

    $119.99
    Add to Cart
  • Coilover Springs

    King Shocks

    Coilover Springs

      These are top quality "KING" coil springs to fit 2.0" coilover shocks. They can be used in any combination. We recommend (2) 12" springs for a 12" travel shock and (2) 14" springs for a 14" travel shock. These are typically separated by a spring...

    $105.00
    Add to Cart
  • 16" Sway Bar Arm (1-1/4" 48 Spline Shaft) Here is the arm installed on a Jeep TJ

    GenRight

    16" Sway Bar Arm (1-1/4" 48 Spline Shaft)

      This is the replacement arm for all GenRight REAR sway bars. SPECS: 16" long Sway Bar Arm 1-1/4" diameter 48 Splines Grade 8 Bolt 2 Washers Nylock Nut NOTE: Arm is supplied as a blank and must be drilled.

    $99.99
    Add to Cart
  • This is the GenRight axle side Front Trac Bar mount for the Jeep JK & JKU Comes with a 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Axle side bracket welded on the axle tube in the proper location Back side view of the axle side Trac Bar bracket welded on the axle tube Axle side bracket welded on the axle tube in the proper location

    GenRight

    Elite Axle Side Trac Bar Mount (2 or 4 Door JK)

    This is a Heavy Duty GenRight axle side Trac Bar mount from the Elite Suspension system or the Jeep JK, 2 or 4 door when using the GenRight coil over suspension with a Currie (60 or 70) or Dynatrac front axles. It keeps the front axle under...

    $99.99
    Choose Options
  • TJ to LJ Body Extension Panel with soft top lip. TJ to LJ Body Extension Panel pieces. Easily welded into place to look completely factory!

    GenRight

    TJ to LJ Body Extension Panels

    This is the formed sheet metal pieces you need to fill the 15" gap in your tub when using our TJ to LJ conversion kit. Once done, a factory LJ Hard top or Soft top will fit your TJ. Features: Two pieces for each side (4 pieces total). Same...

    $99.99
    Add to Cart
  • GenRight's Jeep TJ Frame Side Trac bar mount kit. Inside of GenRight's Jeep TJ Frame Side Trac bar mount pieces assembled for picture. GenRight's TJ / LJ Frame Side Trac bar mount pieces as supplied in the kit. GenRight's TJ Frame Side Trac bar mount kit tacked in place on the frame. TJ Frame side trac bar mount kit, fully welded and painted with Twisted pitman arm.

    GenRight

    TJ/LJ Trac Bar Mount (Frame Side)

    This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler TJ or LJ (1997 - 2006). This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordan's 4500 Class KOH racer!Front...

    $99.99
    Add to Cart
  • GenRight Axle Side Trac Bar Mount Comes with 3/4" Grade 8 Bolt, Washers, and Uni-Torque Nut Here you can see how trac bar and drag link are parallel. Installed Trac Bar mount

    GenRight

    Universal HD Trac Bar Mount, (Axle Side)

    This is the GenRight Axle Side Trac Bar Mounting Bracket for a front 3 link kit. We have sold and installed 1000's of suspension kits and over time we have made several revisions and upgrades to the component parts. This is the...

    $99.99
    Add to Cart
180 of 229 Items

© 2024 GenRight Offroad All rights reserved. | Sitemap